Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
4ws6m12-s22
Información de la pieza
Worm/spur gear drive 460-3-60 cycle input voltage 3 hp tefc brake motor with ieee 45 marine duty rating brake is dust tight water proof electra gear reducer total reduction ratio w/spur gear 228.50; load rating 3, 500 lbs 1ST layer 3000 mid drum 2600 lbs full drum line speed 19 fpm 1ST layer 22 fpm mid drum 25 fpm full drum groove for .5 in diameter cable develops approx 1.75 grooves per in of drum one revolution of drum wraps approx 2.4 ft of cable roller exerts pressure on cable as it winds on/off drum aids in keeping cable from jumping grooves with no load on cable roller receives force from gas springs
NSN
Número de acciones nacionales:
TXT
Descripción:
Power Operated Drum Winch
Código de nombre del artículo:
04575
MRC:
The number of prime movers incorporated in the unit.AAXH
Prime Mover Quantity:
1
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Any acceptable
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Winch w/s nimitz class cvn
MRC:
Indicates the type of prime mover included with the unit.AKDJ
Prime Mover Type:
Electric motor
MRC:
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.AKNA
Inclosure Type:
Partially enclosed
MRC:
The working period under which the item was designed to operate.AKPS
Duty Cycle:
Intermittent
MRC:
The means used to operate the item.APHE
Operation Method:
Powered
MRC:
The distance between flanges on the drum,and the location on the item.ATWD
Drum Flange To Flange Distance And Location:
12.000 inches first drum
MRC:
The length of a straight line which passes through the center of the drum,and terminates at the circumference,and its location on the item.ATWE
Drum Diameter And Location:
9.000 inches first drum
MRC:
The length of a straight line which passes through the center of the drum flange,and terminates at the circumference,and its location on the item.ATWF
Drum Flange Diameter And Location:
14.000 inches first drum
MRC:
The power required to start and operate the item at rated capacity.ATYG
Power Requirement Rating:
5.00 horsepower
MRC:
The design on the drum surface.ATYH
Drum Surface Design:
Grooved
MRC:
The means of cooling used to maintain the required operating temperature of the item.BFMF
Cooling Method:
Any acceptable
MRC:
The total electrical voltage.ELEC
Voltage In Volts:
460.0
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Magnetic reversing starter mounted and wired to winch starter includes contacts for forward/reversing motor thermal overloads w/ adjustable setting fm 4.00-6.00 amps control power transformer to reduce 460 v primary to 120V at op station electronic overload sensor included which cuts current to motor when current exceeds preset max switch is current activated adjustable resetting by reversing direction of op sensor active in forward only will not sense reduced current starter soes not include plugs to power source op station is nema 4 pushbutton station on 12 pt pendant with up/down legends
