Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Isecond end 3.501 in Min 3.502 in Maximum dia 3.625 in Lg ground groove 0.125 in W 3.348 in Diameter between second end and shoulder and groove 0.125 in W 3.688 in Diameter between shoulder and bearing surface
NSN
Número de acciones nacionales:
TXT
Descripción:
Automotive Axle Shaft
Código de nombre del artículo:
10852
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
21.812 inches
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.ACLL
First End Thread Direction:
Right-hand
MRC:
A numeric value that reflects the hardness of a metallic item when used in conjunction with a hardness rating scale.AETC
Metallic Hardness Rating:
270.0 brinell standard and 320.0 brinell standard
MRC:
The amount of first end taper per measurement scale.AMCP
Err Default:
Err default
MRC:
The amount of first end taper per measurement scale.AMCP
First End Taper:
1.500 inches per foot
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the first end tapered portion,and terminates at the circumference.AMCR
First End Taper Major Diameter:
Between 0.363 inches and 0.364 inches
MRC:
A measurement taken at right angles to the length of the keyway at the first end,in distinction from thickness.AMCZ
First End Keyway Width:
Between 0.749 inches and 0.750 inches
MRC:
A measurement between specified points of the keyway at the first end.AMDG
First End Keyway Depth:
Between 0.421 inches and 0.426 inches
MRC:
The length of a striaght line which passes through the center of the first end bearing seat,and terminates at the circumference.AMEL
First End Bearing Seat Diameter:
Between 0.363 inches and 0.365 inches
MRC:
The measured distance of the first end from the bearing seat to the end.AMEP
First End Distance From Bearing Seat To End:
9.375 inches
MRC:
A measurement taken at right angles to the length of the keyway at the second end,in distinction from thickness.AMFR
Second End Keyway Width:
Between 0.749 inches and 0.750 inches
MRC:
A measurement between specified points of the keyway at the second end.AMFT
Second End Keyway Depth:
0.562 inches
MRC:
The length of a straight line which passes through the center of the second end bearing seat,and terminates at the circumference.AMHL
Second End Bearing Seat Diameter:
4.250 inches
MRC:
The measured distance of the second end from the bearing seat to the end.AMHM
Second End Distance From Bearing Seat To End:
Between 6.752 inches and 6.758 inches
MRC:
A narrative description of the first end.AMQA
First End Type:
Tapered
MRC:
A narrative description of the second end.AMQF
Second End Type:
Plain
MRC:
Designates the thread diameter and number of threads per inch of the first end.AQSQ
First End Thread Size:
1.750-5
MRC:
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of specific diameters of the first end.ATKT
First End Thread Series:
Unc
MRC:
The length of a straight line which passes through the center of the facility on the second end,and terminates at the circumference.BNPK
Second End Facility Diameter:
Between 3.753 inches and 3.754 inches
MRC:
An indication of whether or not a first end bearing seat/s/ is included.BNTF
First End Bearing Seat:
Included
MRC:
A measurement taken at right angles to the length of a bearing seat on the first end,in distinction from thickness.BNTG
First End Bearing Seat Width:
3.125 inches
MRC:
The facility furnished on the second end for engaging,locking,and/or positioning the item.BNTQ
Second End Engaging/locking/positioning Facility:
Shoulder
MRC:
A measurement taken at right angles to the length of the facility on the second end,in distinction from thickness.BNTR
Second End Facility Width:
Between 2.997 inches and 3.000 inches
MRC:
Indicates the location of the facility on the second end of the item.BNTS
Second End Facility Location:
3.750 in From shaft end
MRC:
An indication of whether or not a second end bearing seat/s/ is included.BNTT
Second End Bearing Seat:
Included
MRC:
A measurement taken at right angles to the length of a bearing seat on the second end,in distinction from thickness.BNTW
Second End Bearing Seat Width:
Between 2.557 inches and 2.567 inches
MRC:
The length of a straight line which passes through the center of the first end pin hole,and terminates at the circumference.BNYZ
Err Default:
Err default
MRC:
The length of a straight line which passes through the center of the first end pin hole,and terminates at the circumference.BNYZ
First End Pin Hole Diameter:
0.406 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Second end 3.501 in Min 3.502 in Maximum dia 3.625 in Lg ground groove 0.125 in W 3.348 in Diameter between second end and shoulder and groove 0.125 in W 3.688 in Diameter between shoulder and bearing surface
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Steel aisi 4140
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4140
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi 4140 assn standard single material response
