Número de pieza VCW0054-2

Headless Shoulder Pin
Descripción

Pin

Disponibilidad de stock  Códigos de condición del producto

Número de pieza vcw0054-2 está en stock en las siguientes cantidades y condiciones.

  • NS: 6
  • NE: 53

Nota: La disponibilidad de este artículo se actualizó por última vez 01/20/2022 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 229.18 and 309.393 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
vcw0054-2
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
011978211

Información de la pieza
Dry film lubricant

NSN
Número de acciones nacionales:
5315-01-197-8211 5315011978211
TXT
Descripción:
Headless Shoulder Pin
INC
INC
Código de nombre del artículo:
16749
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Counterbored w/o through hole
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.835 inches
MRC:
None.AAUL
Width Between Flats:
Between 0.375 inches and 0.379 inches
MRC:
None.ABPR
First Step Diameter:
Between 0.8585 inches and 0.8590 inches
MRC:
None.ABPS
First Step Length:
0.950 inches
MRC:
None.ABPT
Second Step Diameter:
Between 0.6207 inches and 0.6211 inches
MRC:
None.ABPU
Second Step Length:
1.250 inches
MRC:
None.ABPV
Third Step Diameter:
0.500 inches
MRC:
none.ABPW
Third Step Length:
0.900 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the internal drive.ABQZ
Internal Drive Style:
Socket
MRC:
None.AKVA
Second End Counterbore Depth:
0.060 inches
MRC:
None.AMCS
First End Taper Length:
Between 0.060 inches and 0.070 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
20
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.500 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Threaded end
MRC:
None.CRMG
First End Taper Angle:
Between 44.5 degrees and 45.5 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp XM-13
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5629 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shoulder
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf

Similar Headless Shoulder Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder