Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
uckcnn09cmmp
NSN
Número de acciones nacionales:
TXT
Descripción:
Safety Relief Valve
Código de nombre del artículo:
05488
MRC:
The part that controls the flow through the item.ADQU
Flow Control Device:
Disk
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
8 all ends
MRC:
The maximum temperature at which the item is rated to operate for an extended period of time.AEHZ
Maximum Operating Temp:
100.0 degrees fahrenheit 1ST RESPONSE450.0 degrees fahrenheit 2ND response
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Automatic
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Round with holes all ends
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange all ends
MRC:
Designates the size of the valve.CCFG
Valve Size:
4.000 inches
MRC:
The minimum to maximum pressures at which the item may be set to open.CQCY
Adjustable Pressure Range:
+53.0/+64.0 pounds per square inch
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
285.0 pounds per square inch 1ST RESPONSE185.0 pounds per square inch 2ND response
MRC:
The nominal length of a straight line which passes through the center of an item,and terminates at the outside circumference.CWCD
Outside Diameter:
9.000 inches 1ST END9.000 inches 2ND end
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
1.000 inches 1ST END0.938 inches 2ND end
First Connection Face To Centerline Distance:
7.250 inches
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.875 inches 1ST END0.750 inches 2ND end
Second Connection Face To Centerline Distance:
7.000 inches
MRC:
The nominal length of a straight line which passes through the center of the bolt circle,and terminates at the circumference.CWCT
Bolt Circle Diameter:
9.500 inches 1ST END7.500 inches 2ND end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised straight all ends
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.062 inches 1ST END1.688 inches 2ND end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
7.562 inches 1ST END5.313 inches 2ND end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel bodysteel comp 630 flow control devicesteel comp 416 stem
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
ERR-090
