Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
tih-030m
Desmilitarización:
Yes - DEMIL/MLI
Información de la pieza
Induction heater
NSN
Número de acciones nacionales:
TXT
Descripción:
Aircraft Engine Maintenan Heater
Código de nombre del artículo:
42577
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
7.900 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
10.200 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
18.100 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
F-119 engine
MRC:
An indication of whether or not a heating element is included.BWQH
Heating Element:
Included
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Agav
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Temp control 0-250 degrees c probe thermocouple, k type probe maximum temp 250 degrees c coil diameter 95 mm (3.7IN) for min bearing bore diameter 100 mm (3.9IN); workpiece maximum weight 40KG (88LBS); maximum heating temp 400 degrees c (752 degrees f) 3 standard yokes for min bearing diameter of 2.6IN, 1.6 in .8 in (65MM, 40MM, 20MM); remote control panel inductive coil folding bearing supports yoke storage
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
60.0
MRC:
Describes the capabilities,intended use,and/or purpose for which the item is provided.FTLD
Functional Description:
Designed to heat bearings that are mounted with an interface fit onto a shaft The heat causes the bearing to expand which eliminates the neeed to use force during installation. Designed to heat rolling bearings however other workpieces that form a closed circuit can also be heated
