Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
st4m172n5
Información de la pieza
Aperture diameter chamfered 0.660 in Min 0.670 in Maximum by 90 deg
NSN
Número de acciones nacionales:
TXT
Descripción:
Plate Nut Spacer
Código de nombre del artículo:
17667
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
Between 0.098 inches and 0.103 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the nut.ACTA
Nut Style:
Plate nut spacer
MRC:
A measurement of the longest dimension of the nut,in distinction from width.ACVN
Nut Length:
1.072 inches
MRC:
The length of a straight line which passes through the center of a thru-hole,and terminates at the circumference.ADAZ
Thru-hole Diameter:
Between 0.570 inches and 0.580 inches
MRC:
A measurement of the smallest dimension of a plate,in distinction from length or width.ADEB
Plate Thickness:
Between 0.060 inches and 0.066 inches
MRC:
The means by which the nut is mounted.ADFP
Nut Mounting Provision:
Countersunk holes
MRC:
The side of the plate that the countersink or welding projections are located.ADFR
Mounting Provision Location:
Nut projection side
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
2 holes
Distance From Aperture Center To Mounting Hole Center:
Between 0.495 inches and 0.505 inches
MRC:
The included angle of the mounting hole countersink.CSSM
Mounting Hole Countersink Angle:
Between 98.0 degrees and 102.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 2024
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-A-250/4, alloy 2024, temper T81 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint or anodize
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MMS-425, fscm 76301 mfr ref 1ST treatment response or MIL-A-8625 military specification 2ND treatment response
