Número de pieza SMC121201

Gasket

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 0.8 and 1.08 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
smc121201
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
No qup EA
NIIN:
005928221

Información de la pieza
Eight additional holes 0.204 in Diameter 2 on each w side and two on each length side spaced 3.000 in Center to center on center lines 1.800 in From length edge and 0.280 in From edge along width and center lines 0.300 in From length edge and 2.900 in From width edge along length two centrally located slots one opening on each width side 1.600 in Wide by 1.500 in Deed w ith 0.312 in Radius inside corners

NSN
Número de acciones nacionales:
5330-00-592-8221 5330005928221
TXT
Descripción:
Gasket
INC
INC
Código de nombre del artículo:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.625 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.800 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
6.600 inches
MRC:
A measurement of the line segment extending from the center of a circle or sphere to the curve of an inside corner.ADPQ
Inside Corner Radius:
0.312 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
5.000 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
5.000 inches
MRC:
None.ADUP
Outside Corner Bevel Length Along Width:
0.200 inches
MRC:
None.ADUQ
Outside Corner Bevel Length Along Length:
0.200 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
3.600 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
6.640 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
1.500 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
1.080 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.030 inches
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
35.0 shore durometer a and 45.0 shore durometer a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber synthetic

Similar Gaskets

« Packing and Gasket Materials Catálogo
Comparar ahora»
Claro | Esconder