Número de pieza PL718-10FP

Fluid Filter Element
Disponibilidad de stock  Códigos de condición del producto

Número de pieza pl718-10fp está en stock en las siguientes cantidades y condiciones.

  • NS: 52
  • NE: 25
  • SV: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 04/13/2023 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 49.58 and 66.933 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
pl718-10fp
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
005806282
NSN
Número de acciones nacionales:
2940-00-580-6282 2940005806282
TXT
Descripción:
Fluid Filter Element
INC
INC
Código de nombre del artículo:
32624
MRC:
The length of a straight line which passes through the center of the body,and terminates at the circumference.ABPM
Body Diameter:
6.750 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 2.500 inches and 2.560 inches
MRC:
The size of the smallest particle which the element is capable of removing from the fluid which passes through the filtering material.ADNH
Filtration Rating In Microns:
25.0 absolute and 10.0
MRC:
The direction in which the fluid is passed through the item.ADNK
Flow Direction:
Outside in
MRC:
The amount of pressure loss in the system,due to the resistance of flow through the item.ADNP
Drop Pressure:
3.0 pounds per square inch
MRC:
The difference in opposing pressure which an item is capable of withstanding without evidence of deformation or other damage.ADNQ
Differential Pressure:
100.0 pounds per square inch
MRC:
Indicates the design type of the item.APGF
Design Type:
Nonreusable
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.AZKQ
Tempurature Rating:
250.0 degrees fahrenheit
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the body.AZTL
Bodylength:
Between 17.940 inches and 18.060 inches
MRC:
An indication of the structure or characteristic of the filtering media.CRXW
Filtering Media Design:
Pleated single filtering media response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable container/cartridge
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable filtering medium
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Any acceptable seal
MRC:
The type of media for which the item is designed.MEDA
Media For Which Designed:
Fuel/oil hydrocarbon
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Cylindrical w/ container (rigid)
MRC:
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.ZZZV
Fsc Application Data:
Oil filter internal combustion engine nonaircraft, filter element shall be procured i/a/w federal specification nr F-F-351, type 4, class 4

Similar Fluid Filter Elements

« Engine Air and Oil Filters, Strainers and Cleaners, Nonaircraft Catálogo
Comparar ahora»
Claro | Esconder