Número de pieza PB22420H

Plain Bearing Unit

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 359.38 and 485.163 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
pb22420h
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
005730013
NSN
Número de acciones nacionales:
3130-00-573-0013 3130005730013
TXT
Descripción:
Plain Bearing Unit
INC
INC
Código de nombre del artículo:
30557
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.6250 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.2500 inches
MRC:
A measurement of the center to center distance between the mounting holes along the width.ADFX
Center To Center Distance Between Mounting Holes Along Width:
4.7500 inches
MRC:
None.AFWC
Housing Height:
3.5000 inches
MRC:
A measurement taken at right angles to the length of a housing,in distinction from thickness.AFWE
Housing Width:
6.9370 inches
MRC:
Indicates the type of fitting used to lubricate the item.AGKL
Lubrication Fitting Type:
Hydraulic
MRC:
A measurement of the longest dimension of the base,in distinction from width.AGNF
Base Length:
2.1870 inches
MRC:
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.AGZA
Alignment Type:
Rigid
MRC:
Indicates the type of shaft end provided.ANJS
Shaft End Type:
Closed or open
MRC:
Indicates the type of load capability.ANKK
Load Capability Type:
Radial
MRC:
None.ANKP
Height From Bottom Of Base To Bore Centerline:
Between 1.7450 inches and 1.7550 inches
MRC:
The angle of the lubrication fitting from the horizontal centerline of the item.CWGR
Lubrication Fitting Angle From Horizontal Centerline:
45.0 degrees

Similar Plain Bearing Units

« Mounted Bearings Catálogo
Comparar ahora»
Claro | Esconder