Número de pieza P815-6C

Shim

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 19.9 and 26.865 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
p815-6c
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 PG
NIIN:
012743273

Información de la pieza
Two holes 0.240 in Min and 0.260 in Maximum on one side and two holes 0.302 in Min and 0.322 in Maximum on opposite side tab 0.190 in Min and 0.210 in Maximum along length and 1.420 in Min and 1.430 in Maximum along width with 0.06 in Bend 30 degree radius

NSN
Número de acciones nacionales:
5365-01-274-3273 5365012743273
TXT
Descripción:
Shim
INC
INC
Código de nombre del artículo:
20349
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.420 inches and 1.480 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 1.370 inches and 1.430 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
Between 0.710 inches and 0.770 inches
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
Between 0.800 inches and 0.860 inches
MRC:
None.ADVD
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.300 inches and 0.360 inches
MRC:
None.ADVE
Outside Edge To Bolt Hole Center Distance Along Length:
Between 0.290 inches and 0.350 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Rotary actuator/installation, F-16C/D common
MRC:
The structural characteristic of the item.CQCF
Construction:
One-piece
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 6061
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-A-250/11 federal specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MIL-C-5541, class 3 military specification single treatment response

Similar Shims

« Bushings, Rings, Shims and Spacers Catálogo
Comparar ahora»
Claro | Esconder