Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Long chamfered end may have 0.047 in Min 0.078 in Maximum radius in lieu of chamfer
NSN
Número de acciones nacionales:
TXT
Descripción:
Headless Straight Pin
Código de nombre del artículo:
02390
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Both end drilled
First Hole Diameter:
Between 0.171 inches and 0.175 inches
Second Hole Diameter:
Between 0.151 inches and 0.161 inches
Distance From Centerline Of Hole To End Of Pin:
Between 0.220 inches and 0.230 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes:
Between 2.000 inches and 2.020 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
Between 2.500 inches and 2.520 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 0.6160 inches and 0.6200 inches
First End Taper Length:
Between 0.050 inches and 0.080 inches
MRC:
A measurement of the longest taper dimension at the second end,in distinction from width.AMFM
Second End Taper Length:
Between 0.115 inches and 0.135 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
30.0 rockwell c and 38.0 rockwell c
First End Taper Angle:
43.0 degrees
Second End Taper Angle:
47.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 410
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5613 assn standard single material response
