Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
nas1169-8l
NSN
Número de acciones nacionales:
TXT
Descripción:
Finishing Washer
Código de nombre del artículo:
15932
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.166 inches and 0.196 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 0.557 inches and 0.582 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
0.087 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Between 0.332 inches and 0.342 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
0.016 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
W/s: aircraft thunderbolt ii A-10; aircraft (AC-13H, MC-130H, EC-130E, HC-130); aircraft orion P-3; aircraft viking S-3B; helicopter lamps mark iii SH-60B; helicopter kiowa OH-58 a&c helicopter seahawk H-60; aircraft galaxy C-5; aircraft hercules C-130; aircraft hercules C-130F
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
Between 42.0 rockwell c and 47.0 rockwell c
Recess Angle:
Between 99.0 degrees and 103.3 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1095
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-S-7947, cond a military specification single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
QQ-P-416, type 2, cl 2 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Finishing
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
80205-NAS1169 professional/industrial association standard
