Número de pieza MS21318

Drive Screw
Disponibilidad de stock  Códigos de condición del producto

Número de pieza ms21318 está en stock en las siguientes cantidades y condiciones.

  • NE: 23637
  • NS: 4673
  • AR: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 11/18/2022 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 2.6 and 3.51 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
ms21318
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 HD
NIIN:
002535608
NSN
Número de acciones nacionales:
5305-00-253-5608 5305002535608
TXT
Descripción:
Drive Screw
INC
INC
Código de nombre del artículo:
15896
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.250 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.099 inches and 0.113 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.043 inches and 0.053 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Between 0.060 inches and 0.063 inches
MRC:
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.AAVM
Pilot Length:
Between 0.040 inches and 0.050 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Helicopter landing system lamps mk iii compressor reciprocating M4; engine aircraft F100-PW-200 (F-16A/B/C/D); helicopter MH-53E; helicopter advance attack AH-1W; aircraft (AC-130H, MC-130H, EC-130E, HC-130); trainer B-1B aircraft central message switch AN/TYC-39A; support equipment B-1 aircraft
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.CRGF
Nonmachine Thread Style:
Drive screw (type u)
MRC:
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.CTYF
Nonmachine Thread Diameter:
0.073 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium
MRC:
The number,letter,or symbol that indicates the type,style,grade,class,and the like,of an item in a nonidentifying specification or standard.ZZZT
Specification Or Standard:
U type and 1P style

Similar Drive Screws

« Screws Catálogo
Comparar ahora»
Claro | Esconder