Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
ms13826-1
NSN
Número de acciones nacionales:
TXT
Descripción:
Sleeve Bearing Half
Código de nombre del artículo:
22210
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.2400 inches and 0.2600 inches first
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.1905 inches and 1.1925 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 1.7545 inches and 1.7560 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 1.6275 inches and 1.6282 inches
MRC:
The element,compound,or mixture with which the item is lubricated.ADZG
Lubrication Material:
Lubricating oil
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
28058725972
Left Flange Outside Diameter:
Between 2.3140 inches and 2.3740 inches
Right Flange Outside Diameter:
Between 2.3140 inches and 2.3740 inches
Left Flange Width:
Between 0.0810 inches and 0.0830 inches
Right Flange Width:
Between 0.0810 inches and 0.0830 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the means whereby the lubricant is set into the item.AGKH
Lubricant Accommodation Style:
Grooved circular
MRC:
A measurement from the outer surface of an item to the outermost point of the locking lug.AGKT
Locking Lug Height:
Between 0.0450 inches and 0.0550 inches
MRC:
The distance,measured along a straight line parallel to the longitudinal axis of the lug,from one edge to the other.AGKU
Locking Lug Length:
Between 0.1900 inches and 0.2200 inches
MRC:
The distance,measured along a straight line,perpendicular to the longitudinal axis of the lug,from one edge to the other.AGKV
Locking Lug Width:
Between 0.1750 inches and 0.1800 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round left flange outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round outside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round outside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside left corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Round inside right corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square left flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square right flange body corner
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square right flange outside left corner
MRC:
Indicates the type and number of features used for the introduction of a lubricant or an antirotational device.CTJM
Antirotation/lubrication Type And Quantity:
1 hole
MRC:
The angle formed by the centerline of the bearing and the centerline of two holes not in the same plane.CTLF
Hole Spacing Angle:
28.0 degrees
MRC:
Indicates the location and number of grooves on the surface of the item.CTMQ
Surface Groove Location And Quantity:
1 internal
Distance From Lug End To End Of Bearing:
Between 0.3535 inches and 0.3630 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Copper alloy inner layer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel outer layer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
FED-STD-66 federal standard 2ND material response outer layer
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MS13826-1, 96906 mfr ref 1ST material response inner layer
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Tin
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MS13826-1, 96906 mfr ref single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
18D half sleeve external flanges both ends
