Número de pieza MMF21W0VM7-2CRVE

Annular Ball Bearing

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 91.08 and 122.958 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
mmf21w0vm7-2crve
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
009468276

Información de la pieza
0.5909 in To 0.5923 in Retainer turn ratio two holes drilled through face of retainer contact angle 28.0 deg average running torque 0.40 gm-cm max breakout on od of inner ring

NSN
Número de acciones nacionales:
3110-00-946-8276 3110009468276
TXT
Descripción:
Annular Ball Bearing
INC
INC
Código de nombre del artículo:
00014
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
0.2500 inches
MRC:
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.AEPR
Flange Outside Diameter:
0.6900 inches
MRC:
A measurement taken at right angles to the length of a flange,in distinction from thickness.AGFF
Flange Width:
0.0420 inches
MRC:
None.AGVT
Outer Ring Width:
0.1950 inches
MRC:
None.AGVU
Inner Ring Width:
0.2500 inches
MRC:
None.AGVV
Outer Ring Outside Diameter:
0.6250 inches
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Machined
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Radial
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Straight
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec NO.7
MRC:
The amount of internal loading in a bearing which is independent of any external radial and/or axial load.CTHQ
Bearing Preload Rating:
3.0 pounds
MRC:
The size of the angle formed at the force point of contact.CTHY
Contact Angle:
32.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic phenolic retainer and cotton retainer
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel ball
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel inner ring
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel outer ring

Similar Annular Ball Bearings

« Bearings Antifriction Unmounted Catálogo
Comparar ahora»
Claro | Esconder