Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
m825205-4
NSN
Número de acciones nacionales:
TXT
Descripción:
Thermal Flasher
Código de nombre del artículo:
08410
MRC:
The number of terminals for providing electrical connection to the item.AARA
Terminal Quantity:
1
MRC:
Indicates the type of terminals for providing electrical connection to the item.AARB
Terminal Type:
Connector receptacle
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.250 inches
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
2.590 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
3.000 inches
MRC:
The value,or range of values,of direct current potential for which the item is rated.ACYR
Dc Voltage Rating:
28.0 volts
MRC:
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.ADZC
Environmental Protection:
Dustproof and watertight
MRC:
The pattern or arrangement that describes the mounting configuration of the item.ALGC
Mounting Configuration:
Four 0.175 in Diameter mfg holes spaced on 2.000 in By 2.500 in Mfg centers
MRC:
Indicates the type of actuation provided.APCM
Actuation Type:
Thermal
MRC:
An indication of whether or not the item is adjustable.APCS
Adjustability:
Nonadjustable
MRC:
An indication of the number of flashes per time interval.APFH
Flashing Rate:
85 per minute
MRC:
An indication of the time required for the on and off conditions for a complete operating cycle of an item.APFK
Duty Cycle:
2.0 seconds on
MRC:
Indicates the automatic circuit condition in case of item failure.APFM
Failure Automatic Circuit Condition:
Off
MRC:
An indication of the accuracy of an item,expressed in percent.APFN
Accuracy In Percent:
10.0
MRC:
The number of circuits controlled by the item.APFP
Controlled Circuit Quantity:
1
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
81349-MIL-F-26301 specification (includes engineering type bulletins brochures etc that reflect specification type data in specification format excludes commercial catalogs industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical" "average" "" etc)
