Número de pieza M819351-06KL

Rod End Plain Bearing
Disponibilidad de stock  Códigos de condición del producto

Número de pieza m819351-06kl está en stock en las siguientes cantidades y condiciones.

  • NS: 14
  • NE: 77
  • SV: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 01/10/2023 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 73.92 and 99.792 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
m819351-06kl
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
010556958

Información de la pieza
8 degrees self aligning in either direction grooves in outer race member keyway in shank 0.0930 in Wide 0.560 in Deep 1.2350 in Long

NSN
Número de acciones nacionales:
3120-01-055-6958 3120010556958
TXT
Descripción:
Rod End Plain Bearing
INC
INC
Código de nombre del artículo:
13209
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Left-hand
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.AAZF
Shank Style:
Externally threaded
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 2.4355 inches and 2.4655 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
Between 0.3745 inches and 0.3750 inches
MRC:
None.AGGF
Outer Member Outside Diameter:
Between 1.0150 inches and 1.0350 inches
MRC:
None.AGGG
Bore Center To Shank End Distance:
Between 1.9280 inches and 1.9480 inches
MRC:
None.AGGH
Outer Member Width:
Between 0.4110 inches and 0.4210 inches
MRC:
None.AGGJ
Inner Member Width:
Between 0.4980 inches and 0.5000 inches
MRC:
None.AGGY
Shank Thread Length:
Between 1.1560 inches and 1.2180 inches
MRC:
The limiting radial load which the item can carry at rest without permanent deformation of the stressed surface or the danger of fracture.AGKP
Static Radial Load Rating:
8550 pounds
MRC:
The length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AWDP
Thread Diameter:
0.375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 440C inner member
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630 race insert
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Ball type
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf

Similar Rod End Plain Bearings

« Bearings Plain Unmounted Catálogo
Comparar ahora»
Claro | Esconder