Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
ltct20850-01
NSN
Número de acciones nacionales:
TXT
Descripción:
Constant Frequency Control
Código de nombre del artículo:
11081
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
-10.0/+65.0 degrees celsius
MRC:
The minimum and maximum limits of temperature at which the item is rated for operation.AFGA
Operating Tempurature Range:
-10.0 to 65.0 degrees celsius
MRC:
The maximum voltage rating at which the item is designed to operate in an alternating current and/or direct current circuit,expressed in volts.AFXE
Maximum Voltage Rating In Volts:
105.0 ac or 125.0 ac
MRC:
Indicates the type of inclosure provided to coat,cover,protect,or encase the item.AKNA
Inclosure Type:
Encased
MRC:
The position of the terminal/s/ for making connection to an item.APXH
Terminal Location:
Front
MRC:
The source of power which drives the item.ATJK
Power Source:
External
MRC:
The means of attaching the item.AXGY
Mounting Method:
Flange
MRC:
Indicates the type and number of terminals for providing electrical connection.CCFF
Terminal Type And Quantity:
16 screw
MRC:
A maximum measurement of the longest dimension of an item,in distinction from width.CHQP
Maximumlength:
7.810 inches
MRC:
The maximum measurement taken at right angles to the length of an item,in distinction from thickness.CHQQ
Maximumwidth:
4.100 inches
MRC:
The maximum distance measured in a straight line from the bottom to the top of an item.CHQR
Maximumheight:
3.100 inches
MRC:
An indication of the frequency the item is designed to maintain.CKRH
Maintained Frequency:
100.000 kilohertz
MRC:
Indicates the type of frequency device provided.CKRJ
Err Default:
Err default
MRC:
Indicates the type of frequency device provided.CKRJ
Frequency Device Type:
Resonant circuitry
MRC:
The number of alternating current phases.FAAZ
Phase:
Single
MRC:
The cycles per second /hertz/ of the alternating current.FREQ
Frequency In Hertz:
50.0 or 400.0
MRC:
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.TEST
Test Data Document:
91547-LTCT20850-01 drawing (this is the basic governing drawing such as a contractor drawing original equipment manufacturer drawing etc excludes any specification, standard or other document that may be referenced in a basic governing drawing)
