Número de pieza LT1-575

Headless Straight Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 57.4 and 77.49 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
lt1-575
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
008418864

Información de la pieza
One longitudional hole 0.125 in Dia 3.500 in Lg tapped 0.125-27 npt 0.500 in Deep one hole bored 0.094 in Diameter located 3.188 in From tapped end

NSN
Número de acciones nacionales:
5315-00-841-8864 5315008418864
TXT
Descripción:
Headless Straight Pin
INC
INC
Código de nombre del artículo:
02390
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.266 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.438 inches
MRC:
The overall dimension measured along the longitudinal axis,with terminated points at the extreme ends of the pin.ACHT
Pinlength:
7.000 inches
MRC:
The overall length of a straight line which passes through the center of the pin,and terminates at the outside circumference.ACHU
Pindiameter:
Between 1.2480 inches and 1.2490 inches
MRC:
None.AMCS
First End Taper Length:
0.062 inches
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Identical
MRC:
None.CRMG
First End Taper Angle:
30.0 degrees
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
32.0 microinches outside diameter
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1040
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi assn standard single material response

Similar Headless Straight Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder