Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
l5341490-003
Información de la pieza
The clevis hole has a 0.38 radius The shaft under the clevis has a .25RADIUS in 2 places The rod end has a chamfer of .030X45 degrees plus/minus 5 degrees
NSN
Número de acciones nacionales:
TXT
Descripción:
Rod End Clevis
Código de nombre del artículo:
03796
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A shank
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand shank
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.000 inches shank
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.193 inches and 0.194 inches
MRC:
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.AAZE
Shank Diameter:
0.250 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
0.400 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
The submitted item name was clevis rod end The end item is the B1-B
MRC:
The distance laterally from tip to tip of the fork.AJSD
Fork Span Width:
0.200 inches
Distance From Pivot Pinhole Center To Rod Connection End:
2.980 inches
Fork Arm Thickness:
0.100 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth:
0.580 inches
MRC:
The physical configuration of the hole.BCLP
Hole Shape:
Round
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
28 shank
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.250 inches shank
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-T-9046, ti plate alloy 6 AL-4V, comp c cond a type 3 military standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Clevis
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf shank
