Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
hl246-6-4-1
Información de la pieza
Threaded stud pin protuding head titanium alloy
NSN
Número de acciones nacionales:
TXT
Descripción:
Shouldered Stud
Código de nombre del artículo:
15946
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A stud thread
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand stud thread
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.186 inches nut thread b
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.063 inches nut thread a
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 0.357 inches and 0.377 inches
MRC:
The length of the enlarged portion/s/ located on the shank of the item.AAVK
Shoulder Length:
Between 0.064 inches and 0.074 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
1.026 inches
Nut End Shank Length:
0.325 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Fighter aircraft (F18 e/f)
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
32 stud thread
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.182 inches stud thread
Stud End Shank Length:
0.325 inches
Stud End Shank Diameter:
Between 0.1885 inches and 0.1895 inches
Nut End Shank Diameter:
Between 0.2016 inches and 0.2026 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Finish: cetyl alcohol lube per hi-shear specification 305; threads modified - rolled per MIL-S-8879; has internal hex drive 0.0791-0.0806 across flats x 0.115-0.135 in Deep external threads on drive end are 0.250 in long external threads on other end are 0.063 in Long heat: 160, 000 psi tensile double shear: 6, 130 pounds tension: 3, 160 pounds
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Titanium alloy uns R56400
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
AMS4928 or AMS4967 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Lubricant
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf stud thread
