Número de pieza H60G0398

Directional Control Linear Valve

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 25685.452 and 33588.668 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
h60g0398
Desmilitarización:
Yes - DEMIL/MLI
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
007358305

Información de la pieza
Operating pressure 3000 psi at press and cyl ports proof pressure 4500 psi at press and cyl ports 3000 psi at return port burst pressure 7500 psi at press and cyl ports operating pressure 250 psi operating fluid hydraulic oil per MIL-H-5606 & MIL-H-6083; operating temp -65 to +180 degrees feh operating time not to exceed 0.25 second throught a temp rant of -65 through +180 degrees feh weight 1.85 lbs

NSN
Número de acciones nacionales:
4810-00-735-8305 4810007358305
TXT
Descripción:
Directional Control Linear Valve
INC
INC
Código de nombre del artículo:
61929
INC
COM
Conformidad:
MRC:
The rated valve discharge capacity per unit of time.ADSY
Valve Discharge Flow Rate:
3.5 gallons per minute
MRC:
The means used to control the operation of the valve.AQLR
Valve Operation Method:
Solenoid
MRC:
The maximum pressure at which an item is rated to operate for each type of service with which an item may be used.CQCJ
Maximum Operating Pressure And Media For Which Designed:
3000.0 pounds per square inch hydraulic fluid petroleum base
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Aluminum alloy and copper alloy
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
A rating which expresses the degree of heat or cold as applied to the operation,or limitation of operation,for each type of service with which an item may be used.CRWH
Maximum Operating Tempurature And Media For Which Designed:
180.0 degrees fahrenheit hydraulic fluid petroleum base
MRC:
The total electrical voltage,expressed in volts,and the type of current whether alternating or direct.CSBH
Voltage In Volts And Current Type:
28.0 dc

Similar Directional Control Linear Valves

« Powered Valves Catálogo
Comparar ahora»
Claro | Esconder