Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
f-16-1a3
Unidad de medida:
No qup EA
Información de la pieza
Automatic saw with pusher type barfeed
NSN
Número de acciones nacionales:
TXT
Descripción:
Cutoff Band Saw
Código de nombre del artículo:
17910
MRC:
Indicates the type of current whether alternating,direct,or both.ACDC
Current Type:
Ac
MRC:
The number of complete cyclic changes,per unit of time,for which an item is rated.ACZB
Frequency Rating:
60.0 hertz
MRC:
The value(s) of potential for which the item is rated.AMSE
Voltage Rating:
208.0 pounds per hour wet or 230.0 pounds per hour wet or 460.0 pounds per hour wet or 575.0 pounds per hour wet
MRC:
An indication of the rated horsepower of the item.ANCY
Horsepower Rating:
5.000
MRC:
Indicates the type of cut for which the item is designed.BWLS
Cut Type For Which Designed:
Wet
MRC:
The minimum and maximum limits of the cutting speed.BWMZ
Cutting Speed Range:
+60.0/+425.0 feet per minute
MRC:
Designates the rectangular cross-sectional size of the material accommodated by the item.BZZN
Rectangular Material Cross-sectional Size Accommodated:
+16.000/+17.000 inches
MRC:
A measurement of the round cross-sectional diameter of the material accommodated by the item.BZZP
Round Material Cross-sectional Diameter Accommodated:
16.000 inches
MRC:
A measurement of the longest dimension of the cutting blade,in distinction from width.BZZQ
Cutting Blade Length:
180.000 inches
MRC:
A measurement taken at right angles to the length of the cutting blade,in distinction from thickness.BZZR
Cutting Blade Width:
1.250 inches
MRC:
A measurement of the smallest dimension of a cutting blade,in distinction from length or width.BZZS
Cutting Blade Thickness:
0.042 inches
MRC:
The number of alternating current phases.FAAZ
Phase:
Three
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Capacity for rectangular and round is at 90 deg weight capaci type 2000 lbs blade guide rollers and carbide inserts blade tension manual with indicator bandwheel size 20 in vise automatic air blade drive 7 1/2 hp 3MPH; sawing force 30 - 120 lb sawing feed variable hydraulic coolant capaci type 15 gal hydraulic capaci type 3/4 gal hydraulic drive 1/3HP motor work height 26 in barfeed projection .125 in to 48 in remnant end 17 in bunding 9 in x 17 x standard shipping wieght 3, 300 lbs machine dimensions 90 in wide x 93 in deep x 86 in high
