Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
d-040-882
NSN
Número de acciones nacionales:
TXT
Descripción:
Bearing Retaining Plate
Código de nombre del artículo:
22293
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 38.489 inches and 38.494 inches
Minor Thickness:
0.500 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Between 34.375 inches and 34.380 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
4.000 inches
MRC:
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.ABTB
Mounting Hole Diameter:
0.750 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
20.380 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the mounting hole(s).ADFU
Mounting Hole Arrangement Style:
Single bolt hole circle
MRC:
The number of holes in a bolt circle.ADPM
Bolt Circle Hole Quantity:
10
MRC:
An overall measurement of the smallest dimension of an item,in distinction from length or width.ADUM
Overall Thickness:
5.125 inches
MRC:
The length of a straight line which passes through the center of a mounting bolt circle,and terminates at the circumference.AFFL
Mounting Bolt Circle Diameter:
24.563 inches
First Counterbore Diameter:
22.500 inches
Second Counterbore Depth:
3.156 inches
First Counterbore Depth:
Between 1.005 inches and 1.006 inches
MRC:
A measurement from the bottom to the top of a raised surface,in distinction from depth.CKSR
Raised Surface Height:
3.531 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
250.0 microinches
MRC:
Indicates the type of mounting hole(s) provided on the item.CWJW
Mounting Hole Type:
Round unthreaded
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Round
