Número de pieza CA12294-7

Shouldered Shaft

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 2344.3 and 3164.805 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
ca12294-7
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
011482841

Información de la pieza
Nickel-copper alloy bar class a cold drawn first end 1.1/4-7UNC thd rh second end 3/4-10UNC thd lh eighth step 2.368IN.DIA THD-18/INCH rh 13/16IN.LG; 4 key ways: 2ND step 3/8 x 0.207, 5TH step 1/2 x 0.270, 8TH step 5/16 x 1/8, 10TH step 1/2 x 0.270; 2 tapered lengths: 4TH step 2-1/4IN. To 2-3/4IN. By 2-17/32IN. Lg 9TH step no 9 taper 0.500IN./FT for 2-7/16 in

NSN
Número de acciones nacionales:
3040-01-148-2841 3040011482841
TXT
Descripción:
Shouldered Shaft
INC
INC
Código de nombre del artículo:
22914
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
External threaded
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Circular grooved and externally threaded
MRC:
None.AAHW
Second End Groove Width:
0.0620 inches
MRC:
None.AAHX
Second End Groove Diameter:
0.6250 inches
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
32.781 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Buffalo pump model 6X10 vem
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
1.2500 inches
MRC:
None.AMEA
First End External Thread Length:
0.875 inches
MRC:
None.AMFQ
Second End Distance From End To Groove:
0.562 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.7500 inches
MRC:
None.AMHA
Second End External Thread Length:
0.562 inches
MRC:
The number of steps provided.ATPC
Step Quantity:
11
MRC:
The length of a straight line which passes through the center of the largest step,and terminates at the circumference.CSPY
Largest Step Diameter:
2.750 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
125.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-N-281, class a federal specification single material response

Similar Shouldered Shafts

« Miscellaneous Power Transmission Equipment Catálogo
Comparar ahora»
Claro | Esconder