Número de pieza AN535-0-3

Drive Screw
Disponibilidad de stock  Códigos de condición del producto

Número de pieza an535-0-3 está en stock en las siguientes cantidades y condiciones.

  • NE: 318

Nota: La disponibilidad de este artículo se actualizó por última vez 05/29/2025 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 2.6 and 3.51 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
an535-0-3
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 HD
NIIN:
002535607
NSN
Número de acciones nacionales:
5305-00-253-5607 5305002535607
TXT
Descripción:
Drive Screw
INC
INC
Código de nombre del artículo:
15896
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
0.188 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Round
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 0.118 inches and 0.127 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.041 inches and 0.049 inches
MRC:
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.AAVL
Pilot Diameter:
Between 0.060 inches and 0.063 inches
MRC:
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.AAVM
Pilot Length:
0.047 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Communications terminal satellite AN/GSC-3 (V)1; engine aircraft TF33-P-3/5/9 (C/EC-135, B-52H); trainer B-1B aircraft systems JP-5 aviation fuels airborne mobile dir air spt ctl (2ID), 02M JUL83)(AN/UYQ-3A); close in weapon system (ciws-phalanx); engine aircraft TF33-PW-102 (C135E, EC-135H/K/P); aircraft (AC-130H, MC-130H, EC-130E, HC-130) support equipment B-1 aircraft gun 5-IN./54 cal MK-54; guided missile launching sys
MRC:
Those features,not otherwise specified,which may be required for proper functioning of the item.CBBL
Features Provided:
Casehardened
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of a nonmachine thread.CRGF
Nonmachine Thread Style:
Drive screw (type u)
MRC:
The length of a straight line which passes through the center of the nonmachine threaded portion,and terminates at the circumference.CTYF
Nonmachine Thread Diameter:
0.073 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Cadmium and chromate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
QQ-P-416 type 2 cl 3 federal specification all treatment responses

Similar Drive Screws

« Screws Catálogo
Comparar ahora»
Claro | Esconder