Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
al14135a
Información de la pieza
Navy special project
NSN
Número de acciones nacionales:
TXT
Descripción:
Externally Relieved Body Bolt
Código de nombre del artículo:
06675
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
1.312 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
9.938 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Undercut pan no 2
MRC:
The length of a straight line which passes through the center of a circular head,and terminates at the circumference.AASL
Head Diameter:
Between 1.620 inches and 1.625 inches
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.875 inches
First Diameter From Head:
0.938 inches
Second Diameter From Head:
Between 1.186 inches and 1.187 inches
Third Diameter From Head:
0.938 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
2.688 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
5.688 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
8.375 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
1.125 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
3
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Kgroove 0.281 in Wide by 0.218 in Deep extends full height of head thread end of bolt has diameter of 1.000 in By 0.250 in Lg two slots 0.199 in Wide by 0.281 in Depth on thread end slots 67-1/2 degrees apart
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Groove 0.281 in Wide by 0.218 in Deep extends full height of head thread end of bolt has diameter of 1.000 in By 0.250 in Lg two slots 0.199 in Wide by 0.281 in Depth on thread end slots 67-1/2 degrees apart
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
