Número de pieza AEM02012

Nonmetallic Tubing

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 1.88 and 2.538 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
aem02012
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
# blk FT
NIIN:
014640411

Información de la pieza
working pressure re mrc cqgm 56.0 and burst pressure re mrc cqbd psi at 73 degrees fahrenheit min bend radius 0.625, inside DIAMETER.188 inches outside diameter 0.312 inches wall thickness 0.062 inches ultimate elongation pct 500, tensile stress at 300 pct elonation psi 1550, brittle point degrees f Negative 100, tear resistance lbf in 475, high temperature limit degrees f Intermittent 200.0, ection pct 68, tensile set at 75 pct elongation pct 98, abrasionresistance, mg lost 1, 000 cycles equals

NSN
Número de acciones nacionales:
4720-01-464-0411 4720014640411
TXT
Descripción:
Nonmetallic Tubing
INC
INC
Código de nombre del artículo:
31934
MRC:
A numeric value that reflects the hardness of a nonmetallic item when used in conjunction with a hardness rating scale.AASF
Nonmetallic Hardness Rating:
82.0 shore durometer a
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-100.0 degrees fahrenheit single response and 200.0 degrees fahrenheit single response
MRC:
The hue or tint of the exterior of the item.ADJS
Exterior Color:
Clear
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
6115-01-435-1565; generator set diesel engine p/n 95-531
MRC:
The maximum rated load in tension applied in a longitudinal direction,per unit of cross-sectional area,that the material can withstand without rupture.CQBC
Min. Tensile Strength (psi):
6050 pounds per square inch
MRC:
The minimum internal pressure rating,determined by destruction tests,at which the item can be expected to rupture.CQBD
Burst Test Pressure:
280.0 pounds per square inch single response
MRC:
The maximum pressure at which the item is rated for operation.CQGM
Maximum Operating Pressure:
56.0 pounds per square inch single response
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Plastic polyurethane tube

Similar Nonmetallic Tubings

« Hose and Flexible Tubing Catálogo
Comparar ahora»
Claro | Esconder