Número de pieza A10422

Headless Grooved Pin
Descripción

Pin

Disponibilidad de stock  Códigos de condición del producto

Número de pieza a10422 está en stock en las siguientes cantidades y condiciones.

  • NE: 114
  • NS: 3

Nota: La disponibilidad de este artículo se actualizó por última vez 05/25/2023 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

Imágenes

Imágenes de referencia de esta pieza
Imagen del número de acciones nacionales 5315-00-716-2872

El precio histórico de este producto está entre 7.52 and 10.152 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
a10422
Desmilitarización:
Yes - DEMIL/MLI
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
007162872

Información de la pieza
Heat at 1540-1580 degrees f oil quench temper 1 hr

NSN
Número de acciones nacionales:
5315-00-716-2872 5315007162872
TXT
Descripción:
Headless Grooved Pin
INC
INC
Código de nombre del artículo:
02386
INC
COM
Conformidad:
* ITAR Controlled
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Round
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Square
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
6.020 inches
MRC:
None.ABPA
Undercut Diameter:
0.186 inches
MRC:
None.ABPC
Undercut Width:
0.090 inches
MRC:
None.ABPE
Undercut Radius:
0.050 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.072 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.230 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
1005-00-322-9715
MRC:
Indicates whether or not the second end is identical to the first end.CQBB
Second End Relationship With First End:
Not identical
MRC:
The length of a straight line which passes through the center of the small end of a circular pin,and terminates at the circumference.CQFX
Pin Small End Diameter:
0.205 inches
MRC:
Indicates the location of the first end.CRDY
First End Location:
Grooved end
MRC:
The length of a straight line which passes through the center of the large end of a pin,and terminates at the circumference.CSCG
Pin Large End Diameter:
0.205 inches
MRC:
None.CSKM
First End Outer Radius:
0.110 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 1045 and steel comp 4140 and steel comp 8640 and steel comp 8740
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
ASTMA108 assn standard single material response and ASTMA322 assn standard single material response and ASTMA331 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate manganese and phosphate zinc
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MIL-P-16232, class 1, type m military specification single treatment response and MIL-P-16232, class 1, type 2 military specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
One half groove

Similar Headless Grooved Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder