Número de pieza A02E6013-9

Headed Grooved Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 297.5 and 401.625 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
a02e6013-9
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
000157664

Información de la pieza
0.250 in Diameter hole drilled through longitudinal axis

NSN
Número de acciones nacionales:
5315-00-015-7664 5315000157664
TXT
Descripción:
Headed Grooved Pin
INC
INC
Código de nombre del artículo:
02382
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Chamfered
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat chamfer
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 0.493 inches and 0.498 inches
MRC:
A measurement of the longest effective dimension of an item.ABNZ
Effective Length:
0.904 inches
MRC:
None.ABPA
Undercut Diameter:
Between 0.373 inches and 0.377 inches
MRC:
None.ABPB
Under Head Length:
1.230 inches
MRC:
None.ABPC
Undercut Width:
Between 0.030 inches and 0.040 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
Drilled through head
MRC:
None.ABRC
First Hole Diameter:
0.094 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
1.300 inches
MRC:
None.AMCS
First End Taper Length:
0.228 inches
MRC:
None.CRMG
First End Taper Angle:
30.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
0.625 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches outside diameter
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.250 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 630
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 5643 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Groove

Similar Headed Grooved Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder