Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
999-1107-d-01item82b
Información de la pieza
Weapon system essential
NSN
Número de acciones nacionales:
TXT
Descripción:
Tube Reducer
Código de nombre del artículo:
08506
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2A 2ND end
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
2B 1ST end
MRC:
Refers to the location of the ends whether on the same centerline (concentric) or on different centerlines (eccentric).ACSP
Reducer Type:
Concentric
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Ticonderoga class cg (47)
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Gasket seal (tube) 2ND end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
High pressure flare (used w/ male threaded style no 78)(TUBE) 1ST end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external tube 2ND end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded internal tube 1ST end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.500 inches 2ND end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.875 inches 1ST end
MRC:
The angle of the end surface upon which the mated surface seats.CQRB
Seat Angle:
37.0 degrees 1ST end
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Feat
MRC:
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD
Outside Diameter Tube Accommodated:
0.625 inches 1ST end
MRC:
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD
Outside Diameter Tube Accommodated:
1.000 inches 2ND end
MRC:
The nominal length of a straight line which passes through the center of the reduced passage,and terminates at the inside circumference.CWFN
Reduced Passage Inside Diameter:
0.188 inches 1ST end
MRC:
The nominal length of a straight line which passes through the center of the reduced passage,and terminates at the inside circumference.CWFN
Reduced Passage Inside Diameter:
1.000 inches 2ND end
MRC:
The nominal dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.CWFR
Nominallength:
5.125 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Nickel alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-N-281, cla/clb federal specification single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf 1ST end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf 2ND end
