Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
895349-1
Información de la pieza
Pitch diameter: 0.333 in
NSN
Número de acciones nacionales:
TXT
Descripción:
Rigid Shaft Coupling
Código de nombre del artículo:
13742
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.3125 inches both ends and 0.3140 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.3623 inches both ends and 0.3694 inches both ends
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 0.970 inches and 0.990 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
16 first end
MRC:
A measurement of the longest straight line across a circular cross-sectional plane.ADAV
Overall Diameter:
Between 0.520 inches and 0.540 inches
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The pressure angle of the spline,expressed in degrees.AXFG
Spline Pressure Angle In Deg:
30.000 first end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
0.970 inches both ends and 0.990 inches both ends
MRC:
Indicates the type of spline provided.AXYS
Spline Type:
Involute first end
MRC:
The chemical compound or mechanical mixture properties of which the body is fabricated.CQRG
Body Material:
Steel
MRC:
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.CRTL
Criticality Code Justification:
Aauj and aauh
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Aisi -50 assn standard single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Plain sleeve
