Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Gasket front panel aps
NSN
Número de acciones nacionales:
Código de nombre del artículo:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
0.151 inches and 0.161 inches all holes
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 6.990 inches and 7.010 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
Between 4.990 inches and 5.010 inches
MRC:
A measurement taken at right angles to the length of an aperture,in distinction from thickness.ADUE
Aperture Width:
Between 4.190 inches and 4.210 inches
MRC:
A measurement of the longest dimension of an aperture,in distinction from width.ADUF
Aperture Length:
Between 6.190 inches and 6.210 inches
Outside Corner Bevel Length Along Width:
Between 0.190 inches and 0.210 inches
Outside Corner Bevel Length Along Length:
Between 0.190 inches and 0.210 inches
MRC:
A measurement of the center to center distance between the bolt holes along the width.ADUY
Center To Center Distance Between Bolt Holes Along Width:
2.490 inches and 2.510 inches all holes
MRC:
A measurement of the center to center distance between the bolt holes along the length.ADUZ
Center To Center Distance Between Bolt Holes Along Length:
2.240 inches and 2.260 inches all holes
Outside Edge To Bolt Hole Center Distance Along Width:
Between 0.190 inches and 0.210 inches
Outside Edge To Bolt Hole Center Distance Along Length:
Between 1.240 inches and 1.260 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
Between 0.057 inches and 0.067 inches
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
10
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Meter
Outside Edge To Inside Edge Smallest Distance Along Width:
Between 0.390 inches and 0.410 inches
Outside Edge To Inside Edge Smallest Distance Along Length:
Between 0.390 inches and 0.410 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber neoprene
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
MIL-R-6855, class 2, type b grade 60, adhesive backed military specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Non-circular
