Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
864570r11
NSN
Número de acciones nacionales:
TXT
Descripción:
Nonvehicula Universal Joint Yoke
Código de nombre del artículo:
52119
MRC:
The length of a straight line which passes through the center of the largest diameter of the item,and terminates at the circumference.AAZR
Major Diameter:
2.000 inches
MRC:
A measurement taken at right angles to the length of an item,in distinction from thickness.ABGL
Width:
0.312 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
2.678 inches
MRC:
The center to center distance between holes on the item.ABRF
Center To Center Distance Between Holes (non-core):
1.938 inches
MRC:
A measurement taken at right angles to the length of a fork,in distinction from thickness.AGBT
Fork Width (non-core):
5.812 inches
MRC:
The length of a straight line which passes through the center of the smallest diameter of the item,and terminates at the circumference.AGJR
Minor Diameter (non-core):
1.625 inches
MRC:
Indicates the type of protector provided.AHGU
Protector Type (non-core):
Dirt slinger
MRC:
The length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.AHNX
Bolt Hole Diameter (non-core):
0.460 inches
MRC:
The measurement between specified points of the fork,in distinction from height.AKYX
Fork Depth (non-core):
1.330 inches
MRC:
The distance from the centerline of the universal joint spider to the hub end,measured along a line parallel to the longitudinal axis of the hub.AMBA
Length From Universal Joint Spider Centerline To Hub End (non-core):
9.312 inches
MRC:
The outside length of the machined surface finish measured along a line parallel to the longitudinal axis of the hub.AMBB
Hub Machined Surface Finish Outside Length (non-core):
6.375 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the bore.ANTP
Bore Style (non-core):
ERR-090
MRC:
A measurement from the bottom to the top of the fork, in distinction from depth.BRGT
Fork Height:
6.250 inches
MRC:
An indication of whether or not an outer periphery machined surface finish is included.BSYF
Outer Periphery Machined Surface Finish (non-core):
Included
MRC:
An indication of whether or not the hub end is threaded.BSYJ
Hub End Thread Provision (non-core):
Unthreaded
MRC:
An indication of whether or not a hub bore is included.BSYL
Hub Bore (non-core):
Included
MRC:
The physical configuration of the outside of the item.BTBZ
Outside Shape (non-core):
Round
Bearing Recess/keyway Depth (non-core):
0.395 inches
MRC:
Indicates the type of connection end on the item.BYRC
Connection End Type (non-core):
Hub
MRC:
The number of splines on the shaft.CZKU
Shaft Spline Quantity:
10
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator (non-core):
ERR-090
