Número de pieza 854119-0001

Recessed Washer

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 38.24 and 51.624 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
854119-0001
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
011325311

Información de la pieza
Groove 0.035 in On side of washer groove angle of 44 degrees min and 46 degrees max

NSN
Número de acciones nacionales:
5310-01-132-5311 5310011325311
TXT
Descripción:
Recessed Washer
INC
INC
Código de nombre del artículo:
15933
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 0.250 inches and 0.255 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
0.500 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.060 inches and 0.065 inches
MRC:
None.CQJW
Top Recess Diameter:
0.270 inches
MRC:
None.CRKG
Bottom Recess Angle:
90.0 degrees
MRC:
None.CRSD
Top Recess Angle:
90.0 degrees
MRC:
None.CSML
Bottom Recess Diameter:
0.270 inches
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
AMS5737 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Passivate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
QQ-P-35 federal specification single treatment response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Recessed both sides

Similar Recessed Washers

« Nuts and Washers Catálogo
Comparar ahora»
Claro | Esconder