Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Shaft securing hole 0.250-20UNC-3B 45 degrees from shaft hole centerline parallel to clamping hole centerline stud extension opposite clamp slot 2.150 in Lg x 0.620 in Diameter w/axial hole 0.560 in Deep x 0.375-16UNC-3B thd
NSN
Número de acciones nacionales:
TXT
Descripción:
Hub Clamp
Código de nombre del artículo:
27781
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
4.440 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
2.000 inches
MRC:
A measurement of the smallest dimension of an item,in distinction from length or width.ABNM
Thickness:
0.940 inches
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
1.4300 inches
MRC:
The length of a straight line which passes through the center of a plain hole,and terminates at the circumference.ADCQ
Plain Hole Diameter:
0.3850 inches
Distance From Bore Centerline To End:
1.440 inches
MRC:
The style designation indicating a configuration that most nearly corresponds to the hole/s/ provided for securing the clamp.AHYJ
Clamp Securing Hole Style:
Unthreaded
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches smallest bearing flat
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches inside periphery
MRC:
Designates the specific roughness rating representing the arithmetic average deviation of the surface from the meanline in profile,and its location on the item.CSFN
Surface Finish And Location:
125 microinches opposite bearing flat
MRC:
The element,compound,or mixture of which an item is fabricated,excluding any surface treatment.MATL
Material:
Aluminum
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Rectangular, single bolt secured
MRC:
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.SURF
Surface Treatment:
Phosphate
