Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Gasket for "xh" brake
NSN
Número de acciones nacionales:
Código de nombre del artículo:
04522
MRC:
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.AAGR
Cross Sectional Shape:
Solid single or composition
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-65.0 degrees fahrenheit and 275.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
6.690 inches
MRC:
The length of a straight line which passes through the center of an aperture,and terminates at the circumference.ABVL
Aperture Diameter:
5.190 inches
MRC:
A measurement of the smallest dimension of a cross section,in distinction from length or width.ADVM
Cross-sectional Thickness:
0.060 inches
MRC:
A measurement from the bottom to the top of a cross section,in distinction from depth.ADVN
Cross-sectional Height:
Between 0.135 inches and 0.143 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
X series xh model direct acting brake
First Bolt Circle Diameter:
6.187 inches
Second Bolt Circle Diameter:
5.875 inches
MRC:
The percentage the item will stretch.ANYN
Elongation Percentage:
160
Smallest Bolt Hole Diameter:
0.344 inches
Largest Bolt Hole Diameter:
0.406 inches
Smallest Bolt Hole Quantity:
2
Largest Bolt Hole Quantity:
2
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Inner bolt circle 2 hole (.406 in Dia) are semicircle tabs that protrude out into the aperture with an outside radius of .50 inches from the bolt circle of 5.875 inches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber chloroprene class cr
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Equally spaced bolt holes
