Número de pieza 83-697

Machine Knurling Tool

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 113.84 and 153.684 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
83-697
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
002502593

Información de la pieza
Revolving head of tool requires three pairs of knurls one pair each coarse medium and fine cut types

NSN
Número de acciones nacionales:
3455-00-250-2593 3455002502593
TXT
Descripción:
Machine Knurling Tool
INC
INC
Código de nombre del artículo:
35197
MRC:
A measurement of the longest dimension of the shank,in distinction from width.AATR
Shank Length:
7.500 inches
MRC:
A measurement taken at right angles to the length of the shank,in distinction from thickness.ACVR
Shank Width:
0.620 inches
MRC:
Indicates the type of cut provided.AQZM
Cut Type:
Coarse
MRC:
An indication of whether or not a revolving head is included.AQZP
Revolving Head Feature:
Included
MRC:
A measurement from the bottom to the top of the shank,in distinction from depth.AQZQ
Shank Height:
1.370 inches
MRC:
The physical configuration that most nearly corresponds to the general appearance of the knurl.AQZR
Knurl Pattern:
Raised diamond
MRC:
The length of a straight line which passes through the center of the knurl,and terminates at the outside circumference.AQZS
Knurl Outside Diameter:
0.750 inches
MRC:
An overall measurement taken at right angles to the length of the knurl roll,in distinction from thickness.AQZT
Knurl Rollwidth:
0.370 inches
MRC:
The length of a straight line which passes through the center of the knurl pinhole,and terminates at the circumference.AQZW
Knurl Pinhole Diameter:
0.250 inches
MRC:
A measurement taken at right angles to the length of the knurling face,in distinction from thickness.AQZX
Knurling Face Width:
0.250 inches
MRC:
The minimum capacity of the knurl.AQZY
Err Default:
Err default
MRC:
The minimum capacity of the knurl.AQZY
Minimum Knurling Capacity:
0.250 inches

Similar Machine Knurling Tools

« Cutting Tools For Machine Tools Catálogo
Comparar ahora»
Claro | Esconder