Número de pieza 825-32

Straight Shaft

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards
Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
825-32
Desmilitarización:
No
Vigencia:
Unidad de medida:
NIIN:
000744039

Información de la pieza
Two flats 90 degrees apart at each location on 1ST and 2ND ends and visually coplanar shaft straight within 0.001 in 6 in distances from 2ND end to flats 0.940 in 5.740 in 7.500 in

NSN
Número de acciones nacionales:
3040-00-074-4039 3040000744039
TXT
Descripción:
Straight Shaft
INC
INC
Código de nombre del artículo:
22109
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the first end.AAGZ
First End Style:
Flatted
MRC:
A term used to identify the ends as identical or not identical.AAHN
End Similarity:
Not identical
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the second end.AAHP
Second End Style:
Flat grooved and flatted
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
8.560 inches
MRC:
The length of a straight line which passes through the center of the first end,and terminates at the circumference.AMDL
First End Diameter:
0.3121 inches
MRC:
None.AMFJ
Second End Distance From End To Flat:
0.940 inches
MRC:
None.AMFN
Second End Flat Depth:
0.0311 inches
MRC:
A measurement of the longest dimension of the flat at the second end,in distinction from width.AMFP
Second End Flat Length:
0.250 inches
MRC:
The length of a straight line which passes through the center of the second end,and terminates at the circumference.AMFZ
Second End Diameter:
0.3121 inches
MRC:
None.AMJA
Second End Grooved Flat Length:
0.2500 inches
MRC:
None.AMJB
Second End Grooved Flat Depth:
0.0311 inches
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
16.0 microinches
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-S-763, type 17-4PH federal specification single material response

Similar Straight Shafts

« Miscellaneous Power Transmission Equipment Catálogo
Comparar ahora»
Claro | Esconder