Número de pieza 77D617068P001

Headed Straight Pin

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards
Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
77d617068p001
Desmilitarización:
No
Vigencia:
Unidad de medida:
NIIN:
015804468

Información de la pieza
Pin staybrace

NSN
Número de acciones nacionales:
5315-01-580-4468 5315015804468
TXT
Descripción:
Headed Straight Pin
INC
INC
Código de nombre del artículo:
02384
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Flat
MRC:
A measurement of the longest dimension of the chamfer,in distinction from width.AAZP
Chamfer Length:
0.380 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
Between 1.240 inches and 1.245 inches
MRC:
None.ABPB
Under Head Length:
13.000 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the arrangement of the holes.ABRB
Hole Arrangement Style:
One end drilled
MRC:
None.ABRC
First Hole Diameter:
0.470 inches
MRC:
None.ABRE
Distance From Centerline Of Hole To End Of Pin:
0.740 inches
MRC:
None.CQPJ
Pin Chamfer Angle:
30.0 degrees
MRC:
None.CRRG
Pin Head Diameter:
1.750 inches
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Finish anodize in accordance with MIL-A-8625; type iii class 2, 002 thick color black except that the type iii coating is to pass the corrosion test of paragraph 4.5.3 after 15.000 hours of exposure coating to contain low friction fillers and sealer dimensions apply after finish entrance ends of tapped holes shall be countersunk 80 DEGREES-100 degrees included angle and .02-.05 larger die than the major diameter of the thread
MRC:
A measurement from the bottom to the top of an object,in distinction from depth.HGTH
Height:
0.500 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Straight

Similar Headed Straight Pins

« Nails, Machine Keys and Pins Catálogo
Comparar ahora»
Claro | Esconder