Número de pieza 7606-8043-1

Sleeve Bushing

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 243.22 and 328.347 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
7606-8043-1
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
011677762

Información de la pieza
Square flange left end 2.000 in With 4 equallyspaced 0.159 in Diameter holes on 2.375 in Diameter bolt circle one hole each corner cut in two pieces 0.062 in Wide 1.000 in Center to corners three coats epoxy-polyamide, first coat formula 150 3 to 4 military thick second formula 155 2 to 3 military thick third formula 151 2 to 3 military thick

NSN
Número de acciones nacionales:
3120-01-167-7762 3120011677762
TXT
Descripción:
Sleeve Bushing
INC
INC
Código de nombre del artículo:
13206
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
Between 1.6800 inches and 1.7000 inches
MRC:
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.ADAR
Body Outside Diameter:
Between 1.9700 inches and 1.9900 inches
MRC:
The length of a straight line which passes through the center of a body,and terminates at the inside circumference.ADAS
Body Inside Diameter:
Between 1.7530 inches and 1.7730 inches
MRC:
None.AGFJ
Right Internal Flange Hole Diameter:
Between 1.6300 inches and 1.6500 inches
MRC:
None.AGFL
Right Internal Flange Width:
Between 0.0630 inches and 0.0680 inches
MRC:
The physical configuration of the corner.BZLX
Corner Shape:
Square all corners
MRC:
Designates the specific surface roughness rating,representing the arithmetic average deviation of the surface from the meanline in profile.CSYM
Surface Finish:
63.0 microinches
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic epoxy left end surface of body and flange and plastic polyamide left end surface of body and flange
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic epoxy outside diameter surface of flange and plastic polyamide outside diameter surface of flange
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MIL-P-24441, formula 150, 151, 155 military specification single treatment response left end surface of body and flange

Similar Sleeve Bushings

« Bearings Plain Unmounted Catálogo
Comparar ahora»
Claro | Esconder