Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
74a732001-2007
Información de la pieza
One hole in undercut 0.1255 in Diameter maximum and 0.1250 in Diameter min 1.730 in From head top to center of hole spherical pad on shoulder 0.370 in Diameter min and 0.372 in diameter maximum 0.630 in From head top to middle of spher three holes in the head 0.046 in Diameter min and 0.056 in Diameter max
NSN
Número de acciones nacionales:
TXT
Descripción:
Externally Relieved Body Bolt
Código de nombre del artículo:
06675
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.700 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
11.390 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Double hexagon w/hole
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
0.250 inches
Width Between Flats:
Between 0.430 inches and 0.439 inches
Extended Washer Diameter:
0.620 inches
MRC:
A measurement of the longest dimension of the point,in distinction from width.AAUY
Point Length:
0.132 inches
First Diameter From Head:
0.300 inches
Second Diameter From Head:
Between 0.570 inches and 0.580 inches
Third Diameter From Head:
Between 0.373 inches and 0.375 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
9.230 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
9.460 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
10.426 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the point.ABQJ
Point Style:
Cup
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.375 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
24
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
3
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
Ams 6411 assn standard single material response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unjf
