Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
74a450853-2003
NSN
Número de acciones nacionales:
TXT
Descripción:
Shouldered And Recessed Washer
Código de nombre del artículo:
15935
MRC:
The length of a straight line which passes through the center of a hole,and terminates at the circumference.AAUB
Hole Diameter:
Between 1.1910 inches and 1.1915 inches
MRC:
The length of a straight line which passes through the center of a shoulder,and terminates at the circumference.AAVH
Shoulder Diameter:
Between 1.3140 inches and 1.3145 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
Between 1.624 inches and 1.626 inches
MRC:
The length of a straight line which passes through the center of the recess,and terminates at the circumference.ABMD
Recess Diameter:
Between 1.2510 inches and 1.2515 inches
Shoulder Height:
Between 0.235 inches and 0.240 inches
MRC:
A measurement of the smallest dimension of the material,in distinction from length or width.ABPX
Material Thickness:
Between 0.058 inches and 0.060 inches
Recess Angle:
90.0 degrees
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy 7075
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
QQ-A-225/9, temper T73 federal specification single material response or QQ-A-225/9, temper T7351 federal specification single material response or QQ-A-200/11, temper T73510 federal specification single material response or QQ-A-200/11, temper T73511 federal specification single material response
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
Shouldered and recessed
