Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
7251124-1
Información de la pieza
Protective plate
NSN
Número de acciones nacionales:
TXT
Descripción:
Shipping And Storage Wear Plate
Código de nombre del artículo:
36113
MRC:
The distance measured in a straight line from the bottom to the top of an item.ABKW
Overall Height:
19.820 inches
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
20.100 inches
MRC:
The national stock number or the identification information of the end equipment for which the item is a part.AGAV
End Application:
Mk 14 mod 2, cannister
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
0.075 in Thick rectangular; with long side down has cutouts on each top corner: 0.65 in W x 0.75 in D and larger cutouts at same corners: 4.80 in W x 3.070 in Deep: top edge rolls back with radius of 0.18 in For length of 0.25 in has 6 mounting holes 0.375 inch in dia 2 holes near top edge: 7.547 and 12.453 in From left outside edge and 18.280 inch from bottom edge and 4 holes 0.750 inch from bottom edge and 3.448, 7.848, 12.248 and 16.848 inches from left edge
MRC:
Markings included on an item for the purpose of offering instructions or warnings or to indicate the purpose,function,or application of the item.excludes manufacturers part numbers,symbols,or the like.MARK
Special Markings:
53711-7251124-1 iaw MIL-STD-130 in characters approx 0.19 in
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Paint side from which top rolls back per WS19201, gr f and other side coat per WS20168, overspray onto edges and holes is permitted
MRC:
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.SUPP
Supplementary Features:
Has 5 more holes 0.500 inch in dia: 1 near top edge: 18.280 in From bottom edge and 13.850 in from left edge and 4 holes near bottom edge: one 3.800 in From bottom and 13.850 in From left edge: three holes 2.880 in From bottom and 3.330, 9.580 and 16.920 in From left edge
