Número de pieza 7108KRD101

Duplex Ball Bearing

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 2862.74 and 3864.699 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
7108krd101
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
008705265

Información de la pieza
Zretainer to be silver plated 0.0005 to 0.0015 in Thk per ams 2412, two slots 0.065 in Wide by 0.040 in Deep equally spaced on outer ring inner ring to be silver plated on bore and side surfaces 0.0002 to 0.0004 in Thk per ams 2412

NSN
Número de acciones nacionales:
3110-00-870-5265 3110008705265
TXT
Descripción:
Duplex Ball Bearing
INC
INC
Código de nombre del artículo:
30213
MRC:
An overall measurement taken at right angles to the length of an item,in distinction from thickness.ABMK
Overall Width:
30.0 millimeters
MRC:
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.ABXV
Bore Diameter:
25.0 millimeters
MRC:
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.ADGA
Overall Outside Diameter:
47.0 millimeters
MRC:
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.AGYE
Surface Finish:
Ground
MRC:
The means used in manufacturing the retainer.AGYF
Retainer Fabrication Method:
Machined
MRC:
The direction of load with respect to the shaft axis.AGZC
Load Direction:
Angular
MRC:
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.CTFZ
Standard Tolerance Designation:
Abec NO.5
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.STYL
Style Designator:
92B counterbored outer rings non-separable, back to back mounting

Similar Duplex Ball Bearings

« Bearings Antifriction Unmounted Catálogo
Comparar ahora»
Claro | Esconder