Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Información de la pieza
Two slots 0.062 in By 0.145 in By 1.010 in Equally spaced vertical to thd
NSN
Número de acciones nacionales:
TXT
Descripción:
Externally Relieved Body Bolt
Código de nombre del artículo:
06675
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3A
MRC:
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.AAJF
Thread Direction:
Right-hand
MRC:
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.AASA
Thread Length:
0.826 inches
MRC:
The dimension,measured along a line parallel to the longitudinal axis,from the largest bearing surface of the fastener head to the extreme opposite end,or as specifically designated for other type fasteners.AASB
Fastener Length:
3.920 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the head.AASK
Head Style:
Hexagon
MRC:
A measurement from the bottom to the top of the head,in distinction from depth.AASU
Head Height:
Between 0.400 inches and 0.420 inches
Width Between Flats:
Between 1.052 inches and 1.072 inches
First Diameter From Head:
Between 0.751 inches and 0.752 inches
Second Diameter From Head:
0.690 inches
Third Diameter From Head:
Between 0.751 inches and 0.752 inches
Fourth Diameter From Head:
0.690 inches
Fifth Diameter From Head:
Between 0.751 inches and 0.752 inches
Distance From Largest Bearing Surface Of Head To End Of First Diameter:
0.590 inches
Distance From Largest Bearing Surface Of Head To End Of Second Diameter:
1.260 inches
Distance From Largest Bearing Surface Of Head To End Of Third Diameter:
1.760 inches
Distance From Largest Bearing Surface Of Head To End Of Fourth Diameter:
2.440 inches
Distance From Largest Bearing Surface Of Head To End Of Fifth Diameter:
2.940 inches
MRC:
The nominal length of a straight line which passes through the center of the threaded portion,and terminates at the circumference.AHYM
Thread Diameter:
0.750 inches
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
16
MRC:
A numeric value that reflects the hardness of an item when used in conjunction with a hardness rating scale.CQFM
Hardness Rating:
32.0 rockwell c and 36.0 rockwell c
MRC:
The number of externally relieved diameters on the body,adjacent to the head.CSNG
Externally Relieved Body Diameter Quantity:
5
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Steel comp 4340
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Phosphate
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
Ams 2481 assn standard single treatment response
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf
