Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
NSN
Número de acciones nacionales:
TXT
Descripción:
Steering Wheel
Código de nombre del artículo:
10244
MRC:
The length of a straight line which passes through the center of the smallest end of a tapered hole,and terminates at the circumference.AAZL
Tapered Hole Minor Diameter:
Between 0.917 inches and 0.919 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
18.000 inches
MRC:
A measurement between specified points on the recess,in distinction from height.ABMH
Recess Depth:
0.734 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.ABMZ
Diameter:
1.813 inches
MRC:
The length of a straight line which passes through the center of the smallest circular cross section of the tapered portion,and terminates at the circumference.ABQA
Taper Minor Diameter:
Between 2.990 inches and 3.000 inches
MRC:
The length of a straight line which passes through the center of the largest circular cross section of the tapered portion,and terminates at the circumference.ABQB
Taper Major Diameter:
Between 3.062 inches and 3.072 inches
MRC:
A measurement taken at right angles to the length of a keyway,in distinction from thickness.ABRR
Keyway Width:
Between 0.188 inches and 0.190 inches
MRC:
A measurement from the top surface to the bottom of the keyway groove.ABRV
Keyway Depth:
Between 0.143 inches and 0.147 inches
MRC:
Indicates the type of holes provided in the item to facilitate mounting to another item.ACHY
Mounting Hole Type:
Tapered
MRC:
The number of keyways contained in or on the item.AEVE
Keyway Quantity:
2
MRC:
A measurement of the amount of turning necessary to bring one keyway into coincidence with another,expressed in degrees.AEVJ
Keyway Spacing In Deg:
60.0
MRC:
Indicates the type of grip on the item.AQNA
Grip Type:
Finger
MRC:
An indication of whether or not a keyway is included.AQWT
Keyway:
Included
MRC:
The number of spokes provided.AWKJ
Spoke Quantity:
3
MRC:
An indication of whether or not a horn button recess is included.CDMT
Horn Button Recess:
Included
MRC:
An indication of whether or not a steering column tube recess is included.CDMW
Steering Column Tube Recess:
Included
MRC:
Indicates the type of material used for the rim.CNJB
Rim Material Type:
Tenite
MRC:
Indicates the type of material used for the spoke.CNJC
Spoke Material Type:
Plastic steel reinforced
MRC:
Indicates the type of material used for the hub.CNJD
Hub Material Type:
Plastic steel reinforced
MRC:
The amount of taper of the item.CTKF
Taper:
0.750 per foot in inches
