Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
65307-03023-101
NSN
Número de acciones nacionales:
TXT
Descripción:
Flange To Tube Elbow
Código de nombre del artículo:
29668
MRC:
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.AAJD
Thread Class:
3B inlet
MRC:
The number of bolt holes provided on the item.AECS
Bolt Hole Quantity:
4 2ND end
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the connection.AHNC
Connection Style:
Gasket seal (boss) inlet
MRC:
A measurement of the longest dimension of the leg,in distinction from width.AHSJ
Leg Length:
1.200 inches 3RD end
MRC:
A nominal measurement taken at right angles to the length of an item,in distinction from thickness.AKGF
Width:
2.188 inches 2ND end
MRC:
A nominal measurement of the longest dimension of an item,in distinction from width.AKGG
Length:
2.188 inches 2ND end
MRC:
The physical configuration of the flange.ARKN
Flange Shape:
Rectangular with holes 2ND end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Flange 2ND end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded external tube 1ST end
MRC:
Indicates the type of connection/s/.AWLS
Connection Type:
Threaded internal boss inlet
MRC:
The number of threads on the item per linear inch measured on a line parallel to the thread axis.CMLP
Thready Qty Per Inch (tpi):
12 1ST end
MRC:
Indicates the location of the inlet on the item.CQGJ
Inlet Location:
Low heel single inlet
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
1.625 inches 1ST end
MRC:
A designation that is used for the purpose of general identification of the thread.CQJX
Thread Size:
0.562 inches inlet
MRC:
The angle of the end surface upon which the mated surface seats.CQRB
Seat Angle:
45.0 degrees 1ST end
MRC:
The angle that the flow is turned from the straight flow.CRFY
Flow Angle:
90.0 degrees
MRC:
A nominal measurement of the smallest dimension of an item,in distinction from length or width.CWCK
Thickness:
0.250 inches 2ND end
MRC:
The nominal length of a straight line which passes through the center of the bolt hole,and terminates at the circumference.CWCQ
Bolt Hole Diameter:
0.266 inches 2ND end
MRC:
The center to center nominal distance between bolt holes along the length of an item.CWCY
Center To Center Distance Between Bolt Holes Along Length:
1.565 inches 2ND end
MRC:
The center to center nominal distance between bolt holes along the width of an item.CWDC
Center To Center Distance Between Bolt Holes Along Width:
1.656 inches 2ND end
MRC:
The design of the flange face.CWDF
Flange Face Design:
Raised straight 2ND end
MRC:
A nominal measurement from the bottom to the top surface of a raised face,in distinction from depth.CWDH
Raised Face Height:
0.550 inches 2ND end
MRC:
The nominal length of a straight line which passes through the center of a raised face,and terminates at the circumference.CWDL
Raised Face Diameter:
1.460 inches 2ND end
MRC:
The nominal length of a straight line which passes through the center of the accommodated tube,and terminates at the outside circumference.CWFD
Outside Diameter Tube Accommodated:
1.250 inches 1ST end
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Aluminum alloy
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.MDCL
Material Specification:
AMS4260 assn standard single material response
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize inside
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Anodize outside
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MIL-A-8625 military specification single treatment response inside
MRC:
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.STDC
Surface Treatment Specification:
MIL-A-8625 military specification single treatment response outside
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Un 1ST end
MRC:
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.THSD
Thread Series Designator:
Unf inlet
