Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
650786pc5
Desmilitarización:
Yes - DEMIL/MLI
NSN
Número de acciones nacionales:
TXT
Descripción:
Flexible Shaft Coupling
Código de nombre del artículo:
04459
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.7430 inches both ends and 0.7440 inches both ends
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.7430 inches first end and 0.7440 inches first end
MRC:
The length of a straight line which passes through the center of the smallest cross section of a spline,and terminates at the circumference.AAUH
Spline Minor Diameter:
0.7430 inches second end and 0.7440 inches second end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.8740 inches both ends and 0.8750 inches both ends
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.8740 inches first end and 0.8750 inches first end
MRC:
The length of a straight line which passes through the center of the largest cross section of a spline,and terminates at the circumference.AAUJ
Spline Major Diameter:
0.8740 inches second end and 0.8750 inches second end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
1.1770 inches first end and 1.1970 inches first end
MRC:
The length of a straight line which passes through the center of a counterbored portion of a hole,and terminates at the circumference.AAWY
Counterbore Diameter:
1.0520 inches second end and 1.0720 inches second end
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.1150 inches first end and 0.1350 inches first end
MRC:
The depth of the process used to enlarge part of a hole.AAWZ
Counterbore Depth:
0.2340 inches second end and 0.2600 inches second end
MRC:
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.ABHP
Overall Length:
3.437 inches
MRC:
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.ABKV
Outside Diameter:
3.250 inches
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6 first end
MRC:
The number of splines on or in the item.ABSA
Spline Quantity:
6 second end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined first end
MRC:
The physical configuration of the bore.AGZD
Bore Shape:
Splined second end
MRC:
Indicates the design type of the item.APGF
Design Type:
Insert
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.125 inches second end
MRC:
A measurement of the longest dimension of a spline,in distinction from width.AXFH
Spline Length:
1.250 inches first end
MRC:
The chemical compound or mechanical mixture properties of which the insert is fabricated.CQZG
Insert Material:
Steel
