Número de pieza 620-82029

Plain Encased Seal
Descripción

Solenoid valve

Disponibilidad de stock  Códigos de condición del producto

Número de pieza 620-82029 está en stock en las siguientes cantidades y condiciones.

  • NS: 44
  • OH: 1
  • AR: 10
  • NE: 59
  • SV: 1

Nota: La disponibilidad de este artículo se actualizó por última vez 09/11/2024 y puede haber cambiado desde entonces. Solicite una cotización para conocer los precios y la disponibilidad actualizados.

Precios y disponibilidad

Envíe este formulario para conocer los precios actuales y la disponibilidad de esta NSN.
Número de pieza:
Cantidad:
Dirección de correo electrónico:
Teléfono:
Referencia:
Compañía:
Nombre:

No compartimos ni vendemos su información a nadie.
Privacidad | Letra chica

All major credit cards accepted as well as gov. p-cards

El precio histórico de este producto está entre 9.66 and 13.041 USD. Dependiendo de la cantidad, disponibilidad, condición, plazo de entrega y posible interrupción de un artículo, no podemos garantizar el precio hasta que le proporcionemos un presupuesto actualizado.

Número de pieza
Desmilitarización
Vigencia
UOM
NIIN
Número de pieza:
620-82029
Desmilitarización:
No
Vigencia:
N/A
Unidad de medida:
1 EA
NIIN:
000089197

Información de la pieza
Bearing ball annular

NSN
Número de acciones nacionales:
5330-00-008-9197 5330000089197
TXT
Descripción:
Plain Encased Seal
INC
INC
Código de nombre del artículo:
04214
MRC:
The length of a straight line which passes through the center of an item,and terminates at the outside circumference.ABHE
Outside Diameter:
1.128 inches
MRC:
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.ABJH
Tempurature Rating:
-80.0 degrees fahrenheit and 300.0 degrees fahrenheit
MRC:
The length of a straight line which passes through the center of the accommodation for the shaft,and terminates at the circumference.ABVM
Accommodated Shaft Diameter:
0.625 inches
MRC:
A measurement taken between the flat surfaces /front and back/ of the seal,in distinction from thickness.ADUC
Seal Width:
Between 0.234 inches and 0.266 inches
MRC:
The maximum rated speed of the accommodated rotating shaft.AEAT
Accommodated Shaft Maximum Rated Speed:
3600 feet per minute
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the case.BHHL
Case Style:
Recessed
MRC:
The length of a straight line which passes through the center of a circular housing bore,and terminates at the circumference.CPCW
Housing Bore Diameter:
Between 1.123 inches and 1.125 inches
MRC:
The style designation indicating the configuration that most nearly corresponds to the appearance of the sealing element.CTQC
Sealing Element Style:
Angular-opposed
MRC:
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.FEAT
Special Features:
Speed = 5.000 rpm radial load = 212LBS, thrust load = 0LBS, min life = 4, 000HRS
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q sealing element a
MRC:
The chemical compound or mechanical mixture properties of which the item is fabricated.MATT
Material:
Rubber silicone class q sealing element b
MRC:
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.SFTT
Surface Treatment:
Plastic case
MRC:
The document designator of the specification or standard which established the item of supply.ZZZK
Specification Data:
05047-ASME Y14.100 professional/industrial association standard and 05047-ASME Y14.5M-1994 professional/industrial association standard

Similar Plain Encased Seals

« Packing and Gasket Materials Catálogo
Comparar ahora»
Claro | Esconder